Hubungi Kami

Semua keunggulan dalam satu produk

PRODUK KAMI

Produk bahan sablon PT. Caigle Chemicals Indonesia menggunakan bahan yang ramah lingkungan, memiliki kualitas yang tahan lama, serta diakui secara internasional

Ciptakan Karya Terbaik Anda Dengan Bahan Sablon Terbaik!

Dalam upaya pengembangan produk-produk sablon, Caigle Chemicals telah membangun laboratorium dengan teknologi termutakhir. Dengan formula inovatif, kami berhasil menciptakan solusi yang sempurna serta memenuhi standar nasional maupun internasional.

Hubungi Kami
sablon
Rubber CG 700/800
(Rubber Series)
read more
Milk Splash
Rubber CG-830/840
(Super Matte Rubber Series)
read more
sablon paste (1)
Rubber CG-901/902
(Super Soft Rubber Series)
read more
sablon paste (2)
Rubber CG-2700
(High Coverage Rubber Series)
read more
sablon paste (3)
CG-308
(High Density Paste Series)
read more
sablon paste (4)
CG-272
(Printing Ground Paste)
read more
sablon paste (7)
CG-361/362
(Waterproof Nylon Paste)
read more
sablon paste (6)
CG-521/522
(Dot Printing)
read more
cream paste
CG-819
(Matte Hand-Feeling Coating)
read more
sablon paste cream
CG-999
(Matte Hand-Feeling Coating)
read more
glossy paste
CG-804
(Shining Hand-Feeling Coating)
read more
anti-sublimation
CG-2501
(Anti-Sublimation Paste)
read more
sablon paste (10)
CG-B003
(High-Power Solid Binder)
read more
sablon paste (11)
CG-201/202
(Imitation Discharge Printing White/Clear Series)
read more
ID
EN_US ID
Close

RUBBER CG-700/800

  • RUBBER SERIES
  • Product Parameters:
    • Appearance: White, Clear
    • PH: 6.5-7.5
    All environmental indicators can meet the requirements of Oeko-Tex Standard 100.
  • Notes:
    • If additives need to be added before printing, the pilot test should be made in advance; the amount of the additive cannot exceed 0.5%
    • After adding additives to CG-700/800 product, it is forbidden to mix the paste with additives into the original packaging barrel
Close

RUBBER CG-830/840

  • SUPER-MATTE RUBBER SERIES
  • Product Parameters
    • Appearance: White, Clear
    • PH: 6.5-7.5
    All environmental indicators can meet the requirements of Oeko-Tex Standard 100.
  • Notes:
    • If additives need to be added before printing, the pilot test should be made in advance; the amount of the additive cannot exceed 0.5%
    • After adding additives to CG-830/840 product, it is forbidden to mix the paste with additives into the original packaging barrel.
Close

RUBBER CG-901/902

  • SUPER-SOFT RUBBER SERIES
  • Product Parameters
    • Appearance: White, Clear
    • PH: 6.5-7.5
    All environmental indicators can meet the requirements of Oeko-Tex Standard 100.
  • Notes:
    • If additives need to be added before printing, the pilot test should be made in advance; the amount of the additive cannot exceed 0.5%
    • After adding additives to CG-901/902 product, it is forbidden to mix the paste with additives into the original packaging barrel
Close

RUBBER CG-2700

  • HIGH COVERAGE RUBBER SERIES
  • Product Parameters
    • Appearance: White, Clear
    • PH: 6.5-7.5
    All environmental indicators can meet the requirements of Oeko-Tex Standard 100.
  • Notes:
    • If additives need to be added before printing, the pilot test should be made in advance; the amount of the additive cannot exceed 0.5%
    • After adding additives to CG-2700 product, it is forbidden to mix the paste with additives into the original packaging barrel
Close

CG-308

  • HIGH DENSITY PASTE SERIES
  • Product Parameters
    • Appearance: Clear
    • PH: 6.5-7.5
    All environmental indicators can meet the requirements of Oeko-Tex Standard 100.
  • Notes:
    • If additives need to be added before printing, the pilot test should be made in advance; the amount of the additive cannot exceed 0.5%
    • After adding additives to CG-308 product, it is forbidden to mix the paste with additives into the original packaging barrel
Close

CG-272

  • PRINTING GROUND PASTE
  • Product Parameters
    • Appearance: White, Clear
    • PH: 6.5-7.5
    All environmental indicators can meet the requirements of Oeko-Tex Standard 100.
  • Notes:
    • If additives need to be added before printing, the pilot test should be made in advance; the amount of the additive cannot exceed 0.5%
    • After adding additives to CG-272 product, it is forbidden to mix the paste with additives into the original packaging barrel
Close

CG-361/362

  • WATERPROOF NYLON PASTE
  • Product Parameters
    • Appearance: White, Clear
    • PH: 6.5-7.5
    All environmental indicators can meet the requirements of Oeko-Tex Standard 100.
  • Notes:
    • If additives need to be added before printing, the pilot test should be made in advance; the amount of the additive cannot exceed 0.5%
    • After adding additives to CG-361/362 product, it is forbidden to mix the paste with additives into the original packaging barrel
Close

CG-521/522

  • DOT PRINTING
  • Product Parameters
    • Appearance: White, Clear
    • PH: 6.5-7.5
    All environmental indicators can meet the requirements of Oeko-Tex Standard 100.
  • Notes:
    • If additives need to be added before printing, the pilot test should be made in advance; the amount of the additive cannot exceed 0.5%
    • After adding additives to CG-521/522 product, it is forbidden to mix the paste with additives into the original packaging barrel
Close

CG-819

  • MATTE HAND-FEELING COATING
  • Product Parameters
    • Appearance: Clear
    • PH: 6.5-7.5
    All environmental indicators can meet the requirements of Oeko-Tex Standard 100.
  • Notes:
    • The product must work with additives, and the amount of additives should be 1%. It is necessary to conduct the pilot test in advance to determine the best amount should be used.
    • After adding additives to CG-819 product, it is forbidden to mix the paste with additives into the original packaging barrel.
Close

CG-999

  • MATTE HAND-FEELING COATING
  • Product Parameters
    • Appearance: Clear
    • PH: 6.5-7.5
    All environmental indicators can meet the requirements of Oeko-Tex Standard 100.
  • Notes:
    • The product must work with additives, and the amount of additives should be 1%. It is necessary to conduct the pilot test in advance to determine the best amount should be used.
    • After adding additives to CG-999 product, it is forbidden to mix the paste with additives into the original packaging barrel.
Close

CG-804

  • SHINING HAND-FEELING COATING
  • Product Parameters
    • Appearance: Clear
    • PH: 6.5-7.5
    All environmental indicators can meet the requirements of Oeko-Tex Standard 100.
  • Notes:
    • The product must work with additives, and the amount of additives should be 1%. It is necessary to conduct the pilot test in advance to determine the best amount should be used.
    • After adding additives to CG-804 product, it is forbidden to mix the paste with additives into the original packaging barrel.
Close

CG-2501

  • ANTI-SUBLIMATION PASTE
  • Product Parameters
    • Appearance: Clear
    • PH: 6.5-7.5
    All environmental indicators can meet the requirements of Oeko-Tex Standard 100.
  • Notes:
    • If additives need to be added before printing, the pilot test should be made in advance; the amount of the additive cannot exceed 0.5%
    • After adding additives to CG-2501 product, it is forbidden to mix the paste with additives into the original packaging barrel
Close

CG-B003

  • HIGH-POWER SOLID BINDER
  • Product Parameters
    • Appearance: Yellow, Clear
    • PH: 6.5-7.5
    All environmental indicators can meet the requirements of Oeko-Tex Standard 100.
  • Notes:
    • If additives need to be added before printing, the pilot test should be carried in advance.
    • After adding additives to CG-B003 product, it is forbidden to mix the paste with additives into the original packaging barrel
Close

CG-201/202

  • IMITATION DISCHARGE PRINTING WHITE/CLEAR SERIES
  • Product Parameters
    • Appearance: White, Clear
    • PH: 6.5-7.5
    All environmental indicators can meet the requirements of Oeko-Tex Standard 100.
  • Notes:
    • If additives need to be added before printing, the pilot test should be made in advance; the amount of the additive cannot exceed 0.5%
    • After adding additives to CG-201/202 product, it is forbidden to mix the paste with additives into the original packaging barrel